Support

HOME > Support

For SONY

 COS-11D PT Wiring Method for SONY Transmitter
Transmitter Manufacture SONY
Model UWP-V1 , UWP-V6 , UWP-X7                           
Connector for transmitter φ3.5mm mini plug ( stereo )
Wiring-style 3 wire
Black wire to be connected Ring
White wire to be connected Tip
Shield to be connected Sleeve

 PDF


Transmitter Manufacture SONY
Model DWT-B01 , WRT-822 , WRT-8B                        
Connector for transmitter Hirose 4P  KMC-9BPD-4P
Wiring-style 3 wire
Black wire to be connected 1
White wire to be connected 2
Shield to be connected 4 , case
Additional parts 3-4 jumper

 PDF


Transmitter Manufacture SONY
Model UTX-B03HR
Connector for transmitter Hirose 4P  KMC-9BPD-4P
Wiring-style 3 wire
Black wire to be connected 1
White wire to be connected 3
Shield to be connected 4 , case
Additional parts 2-4 jumper

 PDF

【NOTE】Select "ADVANCED"-->"PHASE"-->"INVERT"


Transmitter Manufacture SONY
Model WRT-28M
Connector for transmitter Hirose 4P  KMC-9BPD-4P                                     
Wiring-style 3 wire
Black wire to be connected    1
White wire to be connected 2
Shield to be connected 4 , case
Additional parts 2-4 10kΩ resistor , 3-4 1μF capacitor

 PDF

【NOTE】This is a connection example. It does not mean to garantee the performance.
【NOTE】In case you have too much gain, to use RM ( Red Mark ) version is recommended.